Many people who own a trailer do not have a weight distribution hitch. This is because they are unaware of the benefits of using one, or they think it will be costly to purchase and install. The truth is that there are many types of hitches, all with different prices and features.

A weight distribution hitch can help keep your towable trailer level and on the ground. It stabilizes the load, so it doesn’t shift around as much and helps balance some of the weight from one side of your car to another. This makes sure that you won’t have any trouble getting up those hills or through those curves without feeling like you’re about to tip over.

It’s important to know what type you need before you make your purchasing decision; otherwise, you may end up buying something that doesn’t work for your needs and experience disappointment when it arrives at your doorstep.

💡
Here are some of the things you need to consider before buying: 5 Things to Consider Before Buying a WD Hitch

What is a weight distribution hitch?

A type of trailer hitch that has been specifically designed to help with the distribution of the load on a vehicle. It is usually used when too many things are loaded in one or not appropriately restrained. A weight-distribution hitch will make sure the heavier items in a van, trailer, or truck don’t result in a problem with traction and cause the vehicle to squat.

3 reasons why you need one

Do you need a weight-distribution hitch? It’s a question many people ask themselves when they’re looking to purchase a new trailer. After all, not every vehicle is equipped with the appropriate hitch for this type of equipment, and there are significant advantages to using one. Here we’ll outline some reasons why you might want or need such an accessory to get your questions answered.

Reason #1: Reduce the strain on your tow vehicle and trailer

A weight distribution hitch is a type of trailer hitch used on the tow vehicle and the trailer. A weight distribution hitch consists of a spring bar and a shackle that attaches to both the trailer and the tow vehicle’s frame. The spring bar and shackle help pull down on the tongue of an empty trailer and evenly distribute the weight on both ends of the trailer by pulling on opposite ends of the tongue.

Using a weight distribution system, you can cut your load approximately in half, as it will only be resting on one side instead of two. This can reduce strain on your RV tires as well as those on your tow vehicle. If you’ve ever had your tow vehicle or RV tires wear out prematurely, this may be a solution that you should consider.

Reason #2: Distribute the load from your RV more evenly between both axles

Another class of hitch that helps properly distribute the load on your tow vehicle to create a more level ride during your travels is the weight distribution hitch. You can use it in conjunction with an RV-specific ball mount or just use it in place of one if you’re already carrying an adjustable ball mount designed for heavy trailers.

The main advantage of using this kind of system is its ability to redistribute the weight evenly between both axles so that neither carries too much burden. This ensures even wear on both tires and prevents them from wearing out prematurely while traveling down the road, which would affect your braking performance as well as your handling.

In addition, a weight-distribution hitch will help you achieve a more level ride, which makes it safer for everyone in the RV and provides a more comfortable travel or camping experience.

Reason #3: It’s great for a heavy load or if you tow with a truck with a short bed

You should buy a weight-distribution hitch if you have a heavy load or if you tow with a short bed truck where it’s hard for the trailer’s tongue to clear obstacles. Weight-distribution hitches raise the tongue weight, which helps distribute the weight of your trailer more evenly onto the tow vehicle and makes it easier for your camper to tug over steeper inclines. This will also make it easier to maintain a steady speed and reduce the chance of swaying. A weight-distribution hitch is an excellent investment if you have these problems.

But do I really need a weight-distribution hitch?

This is an easy scenario. If the combined weight of the trailer and everything in it exceeds 50% greater than the load capacity of your tow vehicle (i.e., if you are towing more than half your RV’s total weight), you should install a weight-distribution hitch, sway control bars, or airbags to achieve better balance.

If you are not sure if this applies to you, calculations can be made using two critical numbers – The Gross Vehicle Weight Rating (GVWR) and Gross Trailer Weight Rating (GTWR). These ratings will be found on either a sticker inside your doorjamb or under the D-shaped bumper. The GTWR number should be significantly less than the GVWR number – by at least 40%.

How to choose the right type of weight distribution hitch for your needs

When it comes to choosing the right hitch, there are three main categories. You have to look at what you want to tow, how much weight you want it to carry, and the size of the trailer.

The first type is a weight-distribution hitch. This is typically used when your trailer is empty or when you’re hauling fast-moving livestock that doesn’t weigh too much. It supports your trailer tongue, which reduces swaying in the wind, but it’s not so suitable for heavier loads.

The second type is a tandem hitch. This is best for carrying heavy weights with small trailers because it distributes the weight over both sides of your vehicle. It allows you to distribute the load around your rig while still maintaining optimal towing performance.

The last type is an anti-sway bar hitch. It’s best for stabilizing heavier loads with larger trailers, but not so much for lighter loads or livestock. This helps ensure that the weight of your load remains evenly distributed on both sides of your vehicle.

Final thoughts

As you can see, a weight-distribution hitch is an important tool for any truck driver to have in their arsenal. But choosing the right type of hitch for your needs may not be as easy as it seems. The key thing to know is that there are different types of hitches designed specifically for certain purposes, and they vary from one another based on what kind of trucks or trailers they’re used with.

In general, though, if you’re looking for something more robust than a standard trailer ball-type hitch, then try exploring options like the DrawTite MaxiLift III Weight Distribution Hitch or even going all out with a Bobtail Trailer Ball Mount.

The weight-distribution hitch is a simple device that makes pulling objects on rocky, uneven terrain easier. If you’re looking for an easy way to get the most power from your vehicle without overloading any of its components or risking damage from pulling with too much force, then this might be just what you need!